home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
mods
/
cellular
/
mits04.txt
< prev
next >
Wrap
Text File
|
1993-04-11
|
3KB
|
74 lines
MITSUBISHI 900
NOTES: This is a dual NAM unit.
The ESN prefix is 134 decimal, 86 hex.
See file MITSTEST.TXT for test mode access.
Mitsubishi: 708-860-4200
NAM programing:
1. Press PWR key for one second to turn on phone.
2. Wait for display to clear.
3. Within ten seconds press and hold the END key while entering
6 9 7 2 8 1 4 (reset code).
4. Release END.
5. The phone will display the first data entry.
6. Press the SEND key to store information and increment the step number.
7. Press CLR to correct any item.
8. Press END to complete programing and exit.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 0 OR 1 duAL no 0=1 NAM, 1=2 NAMS
02 10 DIGITS no1 NAM 1 MIN (AREA CODE AND TEL#)
03 00000 - 32767 SId1 NAM 1 SYSTEM ID
04 0 OR 1 LU1 NAM 1 LOCAL USE MARK
05 0 OR 1 E1 NAM 1 MIN MARK
06 333 OR 334 IPCH1 NAM 1 INITIAL PAGING CHANNEL
07 2 DIGITS ACCOLC1 NAM 1 ACCESS OVERLOAD
08 0 OR 1 PS1 NAM 1 PREFERRED SYSTEM
09 00 TO 15 GIM1 NAM 1 GROUP ID (10 FOR USA)
10 0 OR 1 RI1 NAM 1 ROAM INHIBIT
11 0 OR 1 DTX1 NAM 1 VOX
12 0 OR 1 AR1 NAM 1 SYSTEM AUTO REDIAL
If you selected 0 in step one go to step 24
13 10 DIGITS no2 NAM 2 MIN (AREA CODE & TEL#)
14 00000 - 32767 Sid2 NAM 2 SYSTEM ID
15 0 OR 1 LU2 NAM 2 LOCAL USE MARK
16 0 OR 1 E2 NAM 2 MIN MARK
17 0333 OR 0334 IPCH2 NAM 2 INITIAL PAGING CHANNEL
18 00 TO 15 ACCOLC2 NAM 2 ACCESS OVERLOAD CLASS
19 0 OR 1 PS2 NAM 2 PREFERRED SYSTEM
20 00 TO 15 GIM2 NAM 2 GROUP ID (10 IN USA)
21 0 OR 1 RI1 NAM 2 ROAM INHIBIT
22 0 OR 1 DTX1 NAM 2 VOX
23 0 OR 1 AR1 NAM 2 SYSTEM AUTO REDIAL
24 0000 TO 9999 SECUrity SECURITY CODE
25 0 OR 1 EE END TO END (DTMF) DIALLING
26 0 OR 1 C DTMF CONTINUOUS DTMF SIGNALLING
27 0 OR 1 AL AUTO LOCK
28 0 OR 1 BO HORN ALERT
29 0 OR 1 BEEP TIMER AUDIO BEEP
NOTES:
To install lock code: With phone out of programming mode press FCN, 7,
NNNN LLL STO (where NNNN is 4 digit security code and LLL is new lock code).
LOCK: F 2. UNLOCK: Enter three digit code, press SEND.
SYSTEM SELECT: F 1 displays current then press one of the following to change:
0 = Pref/non pref, 1 = Non pref/pref, 2 = Home only, 3 = Pref only, 4 = Non
pref only.